LaCie 1TB d2 Quadra Hard Disk User Manual download pdf (Page 13)

LaCie d2 Quadra • Design by neil Poulton Getting Connected

User Manual page 13

To connect the power supply:

The power supply kit is composed of two cables: one cable (A)

connects to the LaCie drive; and the other cable (B) connects to

a power outlet, such as a wall outlet or a surge protector.

1. Connect Cable A to your LaCie hard disk.

2. Connect Cable B to the power supply brick (C).

3. Connect Cable B to a surge protector or wall outlet.

4. Turn on the drive by moving the power switch on the back of

the drive to the on or auto position.

CAUTION: Only use the AC adapter supplied with your spe�

ciﬁc LaCie hard disk. Do not use a power supply from another

LaCie hard disk or another manufacturer. Using any other pow�

er cable or power supply may cause damage to the device and

void your warranty.

Always remove the AC adapter before transporting your LaCie

hard disk. Failure to remove the adapter may result in damage

to your drive and will void your warranty.

TECHNICAL NOTE: You may use your LaCie hard disk when

in a foreign country thanks to its 100�240 Volt power supply.

To be able to use this feature, you may need to purchase an

appropriate adapter or cord. LaCie accepts no responsibility

for any damage to the drive resulting from the use of an inap�

propriate adapter. Using an adapter other than one authorized

by LaCie will void your warranty.

2.1. Turning the Drive On

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

No comments

LaCie 1TB d2 Quadra Hard Disk User Manual Page 13