LaCie Dupli Disc DVD125 User Manual download pdf (Page 40)

LaCie Dupli Disc DVD125 USB 2.0

User Manual

page 40

5.5. High Disc Failure Rates

If you are experiencing a high failure rate while copying, please try the following steps:

Lower the speed of the DVD±RW drive (refer to 11.2 CD Burn Speed and 11.3 DVD Burn Speed).

Inspect the blank disc’s surface to ensure that it is not scratched or damaged and check the master disc (4. Verify). We

advise you choose the Test&Copy mode (3. Test & Copy).

•

5.6. Emergency Ejection Of Discs

In the event that a disc cannot be ejected from either of the drives using the tray open buttons (when no duplication

operation is being performed), an emergency eject operation will open the media tray. Switch oﬀ the LaCie Dupli Disc

DVD125 drive and unplug its power cable from the power outlet.

Turn oﬀ the drive and insert a small metal poker, such as an unbent paper clip, into the emergency eject hole until it

presses against the manual eject mechanism. You will feel the mechanism eject the disc tray. Use this method only when

the tray open button is not working.

Troubleshooting

CAUTION: Make sure the LaCie Dupli Disc

DVD125’s power is oﬀ and the power cable is un-

plugged before attempting the emergency ejection

procedure.

ReWritable

Emergency eject hole

1 2 ... 35 36 37 38 39 40 41 42 43 44

No comments

LaCie Dupli Disc DVD125 User Manual Page 40