LaCie Network Space 2 User Manual download pdf (Page 9)

LaCie Network Space 2 • DESIGN BY NEIL POULTON Introduction

User Manual page 9

1.3.3. LED Behavior

The front LED changes to indicate different drive behavior (Fig. 03).

The following table sums up these behaviors.

LED Behavior Indication

Off Drive is turned off

Blue: Fast blinking Drive is initializing

Blue: Static Drive is ready

Blue: Flickering Disk access

Red: Static Disk failure

Red/Blue: blinking Automatic backup in prog-

ress*

TECHNICAL NOTE: Even if you have turned off the front LED us-

ing the administration page (“Dashboard”, see 4.10. Dashboard:

Eco Management), events triggering a red light will always cause the

front LED to turn on.

• For details, refer to section 4.13.2. Auto Import of the USB Device.

1.4. Power Button Functions

Switching on the drive: Turn on the drive by pressing the power but-

ton on the back of the drive for two seconds. The front LED will turn

on then begin blinking.

Switching off the drive: To turn off the drive, press and hold the

power button for 5 seconds until the LED blinks. When the LED turns

off, the drive has shut down.

NOTE: Another way to change the on/off/standby state of the Net-

work Space 2 is to use the Dashboard (see 4.5. Dashboard: Restart/

Shutdown and 4.10. Dashboard: Eco Management).

Fig. 03

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 64 65

No comments

LaCie Network Space 2 User Manual Page 9