LaCie 301515KUA User Manual download pdf (Page 17)

LaCie Network Space 2 • DESIGN BY NEIL POULTON Connecting to a Network

User Manual page 17

2.5. Power Button Functions

The multi-function power button allows you to turn on/off the drive,

activate the sleep mode, and reset to default.

✦ Turn on the drive: Press and hold the power button for two

seconds. The front LED will turn on and then begin blinking.

✦ Turn off the drive: Press and hold the power button for ﬁve

seconds until the LED blinks. It will begin blinking quickly and

will then shut down. The shut down process may take up to

30 seconds.

✦ Activate sleep mode: This mode can be triggered by either:

a. If Deep Sleep Mode is enabled in Dashboard > Eco Man-

agement, by clicking the power button (but do not hold it)

on the back of the drive.

b. Alternatively, if Deep Sleep Mode is enabled in Dashboard

> Eco Management, by clicking the Shut Down button

(also in Dashboard > Eco Management) (Fig. 16 and Fig.

17).

To wake the drive from Deep Sleep Mode, press the power

button on the back of the drive (but do not hold it) or use the

Wake on LAN function in the LaCie Network Assistant (see

4.7.1. Wake on LAN) (see 4.7. Dashboard: Eco Management).

✦ Reset to default: Press and hold the power button for ten sec-

onds. Release the button when the LED becomes solid red.

When the LED begins blinking red, press the button again. (It

will only blink red for ﬁve seconds, so you must press the but-

ton again to conﬁrm reset before the end of the ﬁve seconds.)

If you don’t press the button while the red light is blinking, the

drive will start normally and the reset process will be aborted.

IMPORTANT NOTE: After resetting to default, all ﬁles will be

moved to OpenShare. Thus, any data that was previously stored on

MyShare (and was therefore protected) will, after reset, be accessible

by anyone on the network.

Fig. 16

Fig. 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

No comments

LaCie 301515KUA User Manual Page 17