LaCie 301515KUA User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
LaCie Network Space 2 DESIGN BY NEIL POULTON Accessing & Transferring Files
User Manual page 25
3.4. Accessing Shares via USB
The Network Space 2 can be connected to your network via Ether-
net or directly to a computer via USB. This chapter explains how to
connect your hard drive to a computer. For details on connecting
to your network, refer to chapter 2. Connecting to a Home Network.
IMPORTANT INFO: You must successfully connect to the network
and run the Setup Wizard before connecting the Network Space 2 to
your computer via USB. Follow the steps in chapter 2. Connecting
to a Home Network before continuing. Additionally, you will need
to increase the storage allocated for USB access by adjusting the
USBShare size slider (which is set to 0GB by default) (refer to 2.4.
STEP 4: Completing the Setup Wizard).
TECHNICAL NOTE: If your network is limited to 10/100 Mbit
transfer speeds, the USB connection will generally permit faster
transfer times. In this case, LaCie suggests that as a first step you
copy large quantities of files to the Network Space 2 via USB, then
as a second step, share them throughout your network via the Eth-
ernet connection.
TECHNICAL NOTE: LaCie discourages connecting the Network
Space 2 to your network (Ethernet cable) and to your computer (USB
cable) at the same time. The reason is that if both connections are
active at the same time, USBShare will appear on your computer
(in My Computer for Windows or Desktop for Mac) but will not be
available on the network (the volume is visible but inaccessible). If
you then disconnect the USB connection, USBShare will become ac-
cessible on the network.
TECHNICAL NOTE: If the product is connected both to the net-
work and to a computer via USB, OpenShare and MyShare will be
accessible via the network and USBShare via USB.
Follow these steps to getting your LaCie Network Space 2 connected
to your computer:
3.4.1. STEP 1: Connecting the USB cable
3.4.2. STEP 2: Turn On the Drive
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Comments to this Manuals

No comments